دورية أكاديمية
In Vitro Evaluation of Translucency and Color Stability of CAD/CAM Polymer-Infiltrated Ceramic Materials after Accelerated Aging.
| العنوان: | In Vitro Evaluation of Translucency and Color Stability of CAD/CAM Polymer-Infiltrated Ceramic Materials after Accelerated Aging. |
|---|---|
| المؤلفون: | Al Amri MD; Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia., Labban N; Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia., Alhijji S; Indiana University School of Dentistry, Indianapolis, IN.; College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia., Alamri H; Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia., Iskandar M; Private practice at Radiance Dentistry, Irving, TX., Platt JA; Department of Biomedical Sciences and Comprehensive Care, Division of Dental Materials, Indiana University School of Dentistry, Indianapolis, IN. |
| المصدر: | Journal of prosthodontics : official journal of the American College of Prosthodontists [J Prosthodont] 2021 Apr; Vol. 30 (4), pp. 318-328. Date of Electronic Publication: 2020 Sep 04. |
| نوع المنشور: | Journal Article |
| اللغة: | English |
| بيانات الدورية: | Publisher: Wiley-Blackwell Country of Publication: United States NLM ID: 9301275 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1532-849X (Electronic) Linking ISSN: 1059941X NLM ISO Abbreviation: J Prosthodont |
| أسماء مطبوعة: | Publication: Hoboken, NJ : Wiley-Blackwell Original Publication: Philadelphia, PA : W.B. Saunders Co., c1992- |
| مواضيع طبية MeSH: | Dental Porcelain* , Polymers*, Ceramics ; Color ; Computer-Aided Design ; Materials Testing ; Surface Properties |
| مستخلص: | Purpose: To investigate and compare the translucency and color stability of a newly introduced polymer-infiltrated ceramic network (PICN) material (Crystal Ultra) to those of clinically well-established restorative materials. Materials and Methods: A total of 80 specimens measuring (12 × 14 × 1 mm ± 0.05 mm) were prepared from five CAD/CAM (IPS e.max (IPS), Lava Ultimate (LU), Cerasmart (CS), Vita Enamic (VE), Crystal Ultra (CU)) high translucency (HT) blocks in A2 or equivalent shades. Specimens were randomly allocated into two groups (A and B) (n = 8), and were subjected to 5,000 thermal-cycles (TC). This was followed by one-week immersion of group A specimens in coffee (staining) solution and group B specimens in distilled water. Following immersion, the specimens from both groups were further subjected to 5,000 TC. A spectrophotometer was used to measure the translucency parameter (TP) and color change (ΔE Results: The TP values of the CAD/CAM materials ranged from 18.0-22.0. Following the initial TC, the changes in TP values were significant for VE (p = 0.012). Coffee immersion and further TC significantly impacted the TP values of PICN (VE and CU) materials compared to glass- ceramics (IPS), and resin nanoceramic (CS and LU) materials (p = 0.012). The comparison between CAD/CAM materials at different intervals showed a significant difference in the TP values (p < 0.01). The materials showed perceptible color changes following the initial TC except for PICN materials which demonstrated acceptable color changes. The major color difference was noticed for the resin nanoceramic specimens immersed in coffee; LU and CS showed higher color changes (ΔE Conclusions: The translucency of the newly introduced Crystal Ultra PICN material was low compared to the resin nanoceramics and lithium disilicate glass-ceramic. The Crystal Ultra material exhibited better color stability compared to resin nanoceramics, but higher color change when compared with Vita Enamic PICN and lithium disilicate glass-ceramic CAD/CAM materials. (© 2020 by the American College of Prosthodontists.) |
| References: | Davidowitz G, Kotick PG: The use of CAD/CAM in dentistry. Dent Clin North Am. 2011;55:559-570. Raptis NV, Michalakis KX, Hirayama H: Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent. 2006;26:31-41. Della Bona A, Mecholsky JJ, Jr., Barrett AA, et al: Characterization of glass-infiltrated alumina-based ceramics. Dent Mater. 2008;24:1568-1574. Salazar Marocho SM, Studart AR, Bottino MA, et al: Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics. Dent Mater. 2010;26:483-490. Arnetzl G, Arnetzl GV: Hybrid materials offer new perspectives. Int J Comput Dent. 2015;18:177-186. Kimmich M, Stappert CFJ: Intraoral treatment of veneering porcelain chipping of fixed dental restorations: a review and clinical application. J Am Dent Assoc. 2013;144:31-44. Porto TS, Roperto RC, Teich ST, et al: Brittleness index and its relationship with materials mechanical properties: influence on the machinability of CAD/CAM materials. Braz Oral Res. 2019;33:4. Fu L, Engqvist H, Xia W: Glass-ceramics in dentistry: a review. Materials (Basel) 2020;13:1049. Li RWK, Chow TW, Matinlinna JP: Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res. 2014;58:208-216. Prielipp H, Knechtel M, Claussen N, et al: Strength and fracture toughness of aluminum/alumina composites with interpenetrating networks. Mater Sci Eng: A. 1995;197:19-30. Travitzky NA, Shlayen A: Microstructure and mechanical properties of Al2O3/Cu-O composites fabricated by pressureless infiltration technique. Mater Sci Eng: A. 1998;244:154-160. Wegner LD, Gibson LJ: The fracture toughness behaviour of interpenetrating phase composites. Int J Mech Sci. 2001;43:1771-1791. Sen N, Us YO: Mechanical and optical properties of monolithic CAD-CAM restorative materials. J Prosthet Dent. 2018;119:593-599. Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J. 2011;56:84-96. Gonulol N, Yilmaz F: The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent. 2012;40:20. Janus J, Fauxpoint G, Arntz Y, et al: Surface roughness and morphology of three nanocomposites after two different polishing treatments by a multitechnique approach. Dent Mater. 2010;26:416-425. Lee YK, Lu H, Oguri M, et al: Changes in gloss after simulated generalized wear of composite resins. J Prosthet Dent. 2005;94:370-376. Panzeri Pires-de-Souza FdC, Casemiro LA, Roberti Garcia LdF, et al: Color stability of dental ceramics submitted to artificial accelerated aging after repeated firings. J Prosthet Dent. 2009;101:13-18. Yu B, Ahn JS, Lee YK: Measurement of translucency of tooth enamel and dentin. Acta Odontol Scand. 2009;67:57-64. Turgut S, Bagis B, Turkaslan SS, et al: Effect of ultraviolet aging on translucency of resin-cemented ceramic veneers: an in vitro study. J Prosthodont. 2014;23:39-44. Chen YM, Smales RJ, Yip KH, et al: Translucency and biaxial flexural strength of four ceramic core materials. Dent Mater. 2008;24:1506-1511. Lim HN, Yu B, Lee YK: Spectroradiometric and spectrophotometric translucency of ceramic materials. J Prosthet Dent. 2010;104:239-246. Niu E, Agustin M, Douglas RD: Color match of machinable lithium disilicate ceramics: Effects of cement color and thickness. J Prosthet Dent. 2014;111:42-50. Stevenson B, Ibbetson R: The effect of the substructure on the colour of samples/restorations veneered with ceramic: a literature review. J Dent. 2010;38:361-368. Volpato CA, Monteiro S, Jr., de Andrada MC, et al: Optical influence of the type of illuminant, substrates and thickness of ceramic materials. Dent Mater. 2009;25:87-93. Ozturk E, Chiang YC, Cosgun E, et al: Effect of resin shades on opacity of ceramic veneers and polymerization efficiency through ceramics. J Dent. 2013;41(Suppl 5):e8-e14. Pop-Ciutrila IS, Dudea D, Eugenia Badea M, etal: Shade correspondence, color, and translucency differences between human dentine and a CAD/CAM hybrid ceramic system. J Esthet Restor Dent. 2016;28:S46-55. Subaşı MG, Alp G, Johnston WM, et al: Effects of fabrication and shading technique on the color and translucency of new-generation translucent zirconia after coffee thermocycling. J Prosthet Dent. 2018;120:603-608. Yuan JC, Barão VAR, Wee AG, et al: Effect of brushing and thermal cycling on the shade and surface roughness of CAD-CAM ceramic restorations. J Prosthet Dent. 2018;119:1000-1006. Acar O, Yilmaz B, Altintas SH, et al: Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent. 2016;115:71-75. Archegas LR, Freire A, Vieira S, et al: Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing. J Dent. 2011;39:804-810. Awad D, Stawarczyk B, Liebermann A, et al: Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent. 2015;113:534-540. Kilinc E, Antonson SA, Hardigan PC, etal: Resin cement color stability and its influence on the final shade of all-ceramics. J Dent. 2011;39:e30-e36. Alp G, Subasi MG, Johnston WM, et al: Effect of surface treatments and coffee thermal cycling on the color and translucency of CAD-CAM monolithic glass-ceramic. J Prosthet Dent. 2018;120:263-268. Flury S, Diebold E, Peutzfeldt A, et al: Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials. J Prosthet Dent. 2017;117:767-774. Vasiliu RD, Porojan SD, Birdeanu MI, et al: Effect of thermal cycling, surface treatments and microstructure on the optical properties and roughness of CAD-CAM and heat-pressed glass ceramics. Materials (Basel). 2020;13:381. Roselino Lde M, Cruvinel DR, Chinelatti MA, et al: Effect of brushing and accelerated ageing on color stability and surface roughness of composites. J Dent. 2013;41(Suppl 5):e54-61. Taşın S, Celik G, Ýsmatullaev A, et al: The effect of artificial accelerated aging on the color stability, microhardness, and surface roughness of different dental laminate veneer materials. J Esthet Restor Dent. 2020; 1-7. https://doi.org/10.1111/jerd.12567. Arif R, Yilmaz B, Johnston WM: In vitro color stainability and relative translucency of CAD-CAM restorative materials used for laminate veneers and complete crowns. J Prosthet Dent. 2019;122:160-166. Morresi AL, D'Amario M, Capogreco M, et al: Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review. J Mech Behav Biomed Mater. 2014;29:295-308. Alaqeel S: Effect of grit-blasting on the color stability of zirconia ceramics following exposure to beverages. Cureus. 2020;12:e7170. Della Bona A, Nogueira AD, Pecho OE: Optical properties of CAD-CAM ceramic systems. J Dent. 2014;42:1202-1209. Lee YK: Comparison of CIELAB DeltaE(*) and CIEDE2000 color-differences after polymerization and thermal cycling of resin composites. Dent Mater. 2005;21:678-682. Sharma G, Wu W, Dalal EN: The CIEDE2000 color-difference formula: Implementation notes, supplementary test data, and mathematical observations. Color Res Appl. 2005;30:21-30. Paravina RD, Ghinea R, Herrera LJ, et al: Color difference thresholds in dentistry. J Esthet Restor Dent. 2015;27(Suppl 1):S1-S9. Seyidaliyeva A, Rues S, Evagorou Z, et al: Color stability of polymer-infiltrated-ceramics compared with lithium disilicate ceramics and composite. J Esthet Restor Dent. 2020;32:43-50. Albero A, Pascual A, Camps I, et al: Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network. J Clin Exp Dent. 2015;7:e495-e500. Facenda JC, Borba M, Corazza PH: A literature review on the new polymer-infiltrated ceramic-network material (PICN). J Esthet Restor Dent. 2018;30:281-286. Pulgar R, Lucena C, Espinar C, et al: Optical and colorimetric evaluation of a multi-color polymer-infiltrated ceramic-network material. Dent Mater. 2019;35:e131-e139. Lee YK: Influence of scattering/absorption characteristics on the color of resin composites. Dent Mater. 2007;23:124-131. Gunal B, Ulusoy MM: Optical properties of contemporary monolithic CAD-CAM restorative materials at different thicknesses. J Esthet Restor Dent. 2018;30:434-441. Sarıkaya I, Yerliyurt K, Hayran Y: Effect of surface finishing on the colour stability and translucency of dental ceramics. BMC Oral Health. 2018;18:40. Mansour CH, Kheiralla LS, Ghanem LA: Color stability and surface roughness of CAD/CAM ceramill composite and cerasmart endocrowns. J Dent Med Sci. 2018;17:13-24. Quek SHQ, Yap AUJ, Rosa V, et al: Effect of staining beverages on color and translucency of CAD/CAM composites. J Esthet Restor Dent. 2018;30:e9-e17. Gawriolek M, Sikorska E, Ferreira LF, et al: Color and luminescence stability of selected dental materials in vitro. J Prosthodont. 2012;21:112-122. Coldea A, Swain MV, Thiel N: Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29:419-426. Ferracane JL: Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22:211-222. Lee YK: Criteria for clinical translucency evaluation of direct esthetic restorative materials. Restor Dent Endod. 2016;41:159-66. Church TD, Jessup JP, Guillory VL, et al: Translucency and strength of high-translucency monolithic zirconium oxide materials. Gen Dent. 2017;65:48-52. Kilinc H, Turgut S: Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging: an in vitro study. J Prosthet Dent. 2018;120:107-113. Eldwakhly E, Ahmed DRM, Soliman M, et al: Color and translucency stability of novel restorative CAD/CAM materials. Dent Med Probl. 2019;56:349-356. Barutçugi l Ç, Bilgili D, Barutcigil K, et al: Discoloration and translucency changes of CAD-CAM materials after exposure to beverages. J Prosthet Dent. 2019;122:325-331. Turgut S, Kılınç H, Bağış B: Effect of UV aging on translucency of currently used esthetic CAD-CAM materials. J Esthet Restor Dent. 2019;31:147-152. Agarwalla SV, Malhotra R, Rosa V: Translucency, hardness and strength parameters of PMMA resin containing graphene-like material for CAD/CAM restorations. J Mech Behav Biomed Mater. 2019;100:103388. Cruz MEM, Simões R, Martins SB, et al: Influence of simulated gastric juice on surface characteristics of CAD-CAM monolithic materials. J Prosthet Dent. 2020;123:483-490. Schürmann MG, Olms C: Shade stability of polymer-infiltrated and resin nano ceramics. Open Dent J. 2018;12:791-800. Egilmez F, Ergun G, Cekic-Nagas I, et al: Comparative color and surface parameters of current esthetic restorative CAD/CAM materials. J Adv Prosthodont. 2018;10:32-42. Schürmann M, Olms C: Shade stability of polymer infiltrated and resin nano ceramic crowns after dynamic chewing simulation. Eur J Prosthodont Restor Dent. 2018;26:174-183. Karakaya I, Cengiz-Yanardag E: Changes in optical characteristics and surface topography of CAD/CAM materials after bleaching applications: an AFM evaluation. J Prosthodont. 2020;29:226-236. Sayan M, Bahsi E, Sayan S: The evaluation of the colour changes of traditional composites, ceramic blocks and CAD/CAM composites in different solutions. Niger J Clin Pract. 2020;23:660-667. |
| معلومات مُعتمدة: | FR 0542 The College of Dentistry Research Centre and Deanship of Scientific Research at King Saud University |
| فهرسة مساهمة: | Keywords: CAD/CAM; Coffee staining; Color change; Hybrid ceramic; Optical properties; Thermal-cycling |
| المشرفين على المادة: | 0 (Polymers) 12001-21-7 (Dental Porcelain) |
| تواريخ الأحداث: | Date Created: 20200820 Date Completed: 20210413 Latest Revision: 20210413 |
| رمز التحديث: | 20221213 |
| DOI: | 10.1111/jopr.13239 |
| PMID: | 32813300 |
| قاعدة البيانات: | MEDLINE |
Full Text Finder كن أول من يترك تعليقا!