| مستخلص: |
The use of alternative renewable sources to totally or partially replace bitumen is one of the most current challenges in the road pavement sector. The growing energy cost and environmental concerns lead to the necessity to find alternative solutions, by supporting at the same time sustainability and circular economy principles. Within this framework, this paper presents the application of a powder lignin, a natural bio-polymer deriving from by-products of wood pulp and paper industry, to replace part of bitumen. The bituminous blend consisting in 70% of bitumen and 30% of powder lignin (by weight) was made in laboratory through the use of a high shear stirring mixer, and a reference plain bitumen characterised by a similar consistency (i.e., same penetration grade) was used as comparison. Then, an extensive investigation on chemical and rheological properties of the bio-binder is presented. Fourier transform infrared spectroscopy (FTIR), saturates, aromatics, resins and asphaltenes (SARA), bending beam rheometer (BBR), frequency sweep tests and multiple stress creep recovery tests (MSCR) with a dynamic shear rheometer (DSR) were performed. Moreover, unaged, short- and long-term aging conditions were considered. Results indicated that powder lignin dominates the rheological behaviour of the bio-binder and, from chemical analysis, it seems that it partially acts as a filler and partially as a binder. This would result in improved performances at both low and high temperatures, leading to a wider temperature range of performance grade (PG). Moreover, despite a stiffening effect is recognised, lignin also offers an antioxidant potentiality, reducing the aging susceptibility of the investigated bio-binder. |
Full Text Finder