دورية أكاديمية
Control of an Outer Rotor Doubly Salient Permanent Magnet Generator for Fixed Pitch kW Range Wind Turbine Using Overspeed Flux Weakening Operations
العنوان: | Control of an Outer Rotor Doubly Salient Permanent Magnet Generator for Fixed Pitch kW Range Wind Turbine Using Overspeed Flux Weakening Operations |
---|---|
المؤلفون: | Aziz Remli, Cherif Guerroudj, Jean-Frédéric Charpentier, Tarek Kendjouh, Nicolas Bracikowski, Yannis L. Karnavas |
المصدر: | Actuators, Vol 12, Iss 4, p 168 (2023) |
بيانات النشر: | MDPI AG, 2023. |
سنة النشر: | 2023 |
المجموعة: | LCC:Materials of engineering and construction. Mechanics of materials LCC:Production of electric energy or power. Powerplants. Central stations |
مصطلحات موضوعية: | wind energy conversion system, outer rotor, DSPMG, MTPA, flux weakening, fuzzy logic controller, Materials of engineering and construction. Mechanics of materials, TA401-492, Production of electric energy or power. Powerplants. Central stations, TK1001-1841 |
الوصف: | This paper deals with the analysis of the dynamic performance of a generator with a doubly salient exterior rotor excited by permanent magnets inserted in the stator yoke. The electrical generator works at low speed and is devoted to a wind energy conversion system. Indeed, the studied generator is a robust high-torque machine and can be directly coupled to the turbine blades. It must therefore assure the energy conversion for wind speeds lower or higher than its base speed. In fact, the control technique used in this work covers the two main operating zones: below the base speed and above it. In the first case, the maximum torque per ampere control law is developed; however, when the base speed is reached, the flux decay control law is implemented and, consequently, the system works above the nominal conditions. Fuzzy logic controllers are employed to regulate direct and quadrature machine currents and DC voltage in order to obtain satisfactory regulation performances. The ensemble of the wind turbine and electrical machine with technical control is performed in Matlab/Simulink software. The simulation results obtained show the capability of the machine to operate at variable speeds, ensuring efficient energy conversion under and over the nominal speed. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 2076-0825 |
Relation: | https://www.mdpi.com/2076-0825/12/4/168; https://doaj.org/toc/2076-0825 |
DOI: | 10.3390/act12040168 |
URL الوصول: | https://doaj.org/article/06e7e9103c1e468fa38f64a2dc7ac70e |
رقم الأكسشن: | edsdoj.06e7e9103c1e468fa38f64a2dc7ac70e |
قاعدة البيانات: | Directory of Open Access Journals |
كن أول من يترك تعليقا!