دورية أكاديمية
أعرض في EDS

Simulation Studies of the Impact of the Gate Location on the Deformation of the PA 6 GF30 Injection Molded Part

التفاصيل البيبلوغرافية
العنوان: Simulation Studies of the Impact of the Gate Location on the Deformation of the PA 6 GF30 Injection Molded Part
المؤلفون: J. Nabiałek
المصدر: Archives of Metallurgy and Materials, Vol vol. 69, Iss No 2, Pp 699-703 (2024)
بيانات النشر: Polish Academy of Sciences, 2024.
سنة النشر: 2024
المجموعة: LCC:Mining engineering. Metallurgy
LCC:Materials of engineering and construction. Mechanics of materials
مصطلحات موضوعية: injection molding, moldflow, modeling, simulation, gate location, Mining engineering. Metallurgy, TN1-997, Materials of engineering and construction. Mechanics of materials, TA401-492
الوصف: The paper shows the results of computer modeling of the polymer injection molding process. The influence of the gating system design on the warpage and volumetric shrinkage of the molded part was investigated. Particular attention was paid to the location of the gate. It has been proven that the selection of the place where the material is brought to the molding cavity has a significant impact on the final shape and quality of the molded part. The degree of compliance of its shape with the assumptions and dimensional accuracy was adopted as the criteria for assessing the quality of the molded part. The specialized software package Autodesk Moldflow Insight was used for numerical calculations. The obtained modeling results were related to the design recommendations of gating systems known from the literature.
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: English
تدمد: 2300-1909
Relation: https://journals.pan.pl/Content/131911/AMM-2024-2-47-Nabialek.pdf; https://doaj.org/toc/2300-1909
DOI: 10.24425/amm.2024.149799
URL الوصول: https://doaj.org/article/437bea9a0f874348a001e6f80aeb3366
رقم الأكسشن: edsdoj.437bea9a0f874348a001e6f80aeb3366
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:23001909
DOI:10.24425/amm.2024.149799