دورية أكاديمية
Role of grinding method on granular activated carbon characteristics
العنوان: | Role of grinding method on granular activated carbon characteristics |
---|---|
المؤلفون: | Gulizhaer Abulikemu, David G. Wahman, George A. Sorial, Mallikarjuna Nadagouda, Eva K. Stebel, Erika A. Womack, Samantha J. Smith, Eric J. Kleiner, Brooke N. Gray, Rose D. Taylor, Cameron X. Gastaldo, Jonathan G. Pressman |
المصدر: | Carbon Trends, Vol 11, Iss , Pp 100261- (2023) |
بيانات النشر: | Elsevier, 2023. |
سنة النشر: | 2023 |
المجموعة: | LCC:Chemistry |
مصطلحات موضوعية: | Grinding, Granular activated carbon, Adsorption, Surface properties, Shock, Shear, Chemistry, QD1-999 |
الوصف: | A coconut shell (AC1230CX) and a bituminous coal based (F400) granular activated carbon (GAC) were ground with mortar and pestle (MP), a blender, and a bench-scale ball milling unit (BMU). Blender was the most time-efficient for particle size reduction. Four size fractions ranging from 20 × 40 to 200 × 325 were characterized along with the bulk GACs. Compared to bulk GACs, F400 blender and BMU 20 × 40 fractions decreased in specific surface area (SSA, –23% and –31%, respectively) while smaller variations (–14% to 5%) occurred randomly for AC1230CX ground fractions. For F400, the blender and BMU size fraction dependencies were attributed to the combination of (i) radial trends in the F400 particle properties and (ii) importance of shear (outer layer removal) versus shock (particle fracturing) size reduction mechanisms. Compared to bulk GACs, surface oxygen content (At%-O1s) increased up to 34% for the F400 blender and BMU 20 × 40 fractions, whereas all AC1230CX ground fractions, except for the blender 100 × 200 and BMU 60 × 100 and 100 × 200 fractions, showed 25–29% consistent increases. The At%-O1s gain was attributed to (i) radial trends in F400 properties and (ii) oxidization during grinding, both of which supported the shear mechanism of mechanical grinding. Relatively small to insignificant changes in point of zero charge (pHPZC) and crystalline structure showed similar trends with the changes in SSA and At%-O1s. The study findings provide guidance for informed selection of grinding methods based on GAC type and target particle sizes to improve the representativeness of adsorption studies conducted with ground GAC, such as rapid small-scale column tests. When GACs have radial trends in their properties and when the target size fraction only includes larger particle sizes, manual grinding is recommended. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 2667-0569 |
Relation: | http://www.sciencedirect.com/science/article/pii/S2667056923000160; https://doaj.org/toc/2667-0569 |
DOI: | 10.1016/j.cartre.2023.100261 |
URL الوصول: | https://doaj.org/article/dcddb8bbbee542f19b5873b3d825c21a |
رقم الأكسشن: | edsdoj.b8bbbee542f19b5873b3d825c21a |
قاعدة البيانات: | Directory of Open Access Journals |
كن أول من يترك تعليقا!