التفاصيل البيبلوغرافية
| العنوان: |
Effect of Sc addition on downstream processing of twin-roll cast Al−Cu−Li−Mg−Zr-based alloys |
| المؤلفون: |
KRÁLÍK, Rostislav, KŘIVSKÁ, Barbora, BAJTOŠOVÁ, Lucia, STOLBCHENKO, Mykhailo, SCHAPER, Mirko, GRYDIN, Olexandr, CIESLAR, Miroslav |
| المصدر: |
Transactions of Nonferrous Metals Society of China; June 2024, Vol. 34 Issue: 6 p1759-1773, 15p |
| مستخلص: |
A processing scheme for preparing strips of Al−Cu−Li−Mg−Zr-based alloys microalloyed with Sc was proposed. This scheme includes a twin-roll casting of strips with a near-net-shaped 3 mm-thick gauge and a homogenization/solution treatment processing step. Two twin-roll cast Al−Cu−Li−Mg−Zr-based alloys were studied, one with an addition of 0.17 wt.% Sc, and the other without addition of Sc. Both alloys were annealed at 300 °C for 30 min, 450 °C for 30 min, and 530 °C for 30 min and quenched into room temperature water. The first two annealing steps provide a fine dispersion of Al3Zr/Al3(Sc,Zr) particles. The final annealing step serves as homogenization/solution treatment. A fine crystallization structure of the twin-roll cast materials enables the dissolution of primary particles containing the main alloying elements during a relatively short annealing time. Shorter soaking duration limits the depletion of surface layers from Li and significant coarsening of Al3Zr/Al3(Sc,Zr) dispersoids. The Sc-containing material has significantly finer grains already in the as-cast state. The Al3(Sc,Zr) dispersoids formed during the homogenization/solution treatment step prevent grain coarsening at high temperatures. Strengthening θ′(Al2Cu), T1(Al2CuLi), and rare S’(Al2CuMg) phases are formed during subsequent artificial aging at 180 °C. The increase in yield strength was 200 MPa in the peak-aged conditions. This value is comparable to the ones reported in similar direct-chill cast materials, thus validating the proposed processing scheme. |
| قاعدة البيانات: |
Supplemental Index |
Full Text Finder