A new dual beam laser deep penetration welding technology for lap joint of 1.5 mm thick aluminum alloy and high strength steel was explored in this paper, and the effects of three different beam energy ratios (RS=0.25,0.33,0.5) on weld formation, interface microstructure and mechanical properties were studied. The result shows that under certain conditions of other parameters, double beam laser deep penetration welding process can be applied to lap joint of aluminum alloy / high strength steel with good weld shape when RS=0.25,0.33,0.5. As RS increases from 0.25 to 0.5, the penetration of the weld reduces from 575 μm to 424.2μm, the thickness of intermetallic compound (IMC) layer at the interface between aluminum alloy and weld metal reduces from 3.4 μm to 2.5 μm, the average microhardness of the IMC layer decreases from 771.1 HV to 571.9 HV, the mechanical resistance of the joint raises from 95.7N/mm to 115.2N/mm. When RS=0.5, double beam laser deep penetration welding of aluminum alloy / high-strength steel joints has the highest mechanical resistance of joints, because of the relatively good plastic ductility of the joint.
