Effect of Substrate Surface Roughness on Microstructure and Mechanical Properties of Cold-Sprayed Ti6Al4V Coatings on Ti6Al4V Substrates
| العنوان: | Effect of Substrate Surface Roughness on Microstructure and Mechanical Properties of Cold-Sprayed Ti6Al4V Coatings on Ti6Al4V Substrates |
|---|---|
| المؤلفون: | Wen Sun, Zhili Dong, Erjia Liu, Ayan Bhowmik, Adrian Wei-Yee Tan, Iulian Marinescu, Han Zheng, Wei Zhai, Feng Li, Xu Song, Jun Yan Lek |
| المصدر: | Journal of Thermal Spray Technology. 28:1959-1973 |
| بيانات النشر: | Springer Science and Business Media LLC, 2019. |
| سنة النشر: | 2019 |
| مصطلحات موضوعية: | 010302 applied physics, Materials science, Substrate (chemistry), Titanium alloy, 02 engineering and technology, Adhesion, Surface finish, engineering.material, Condensed Matter Physics, Microstructure, 01 natural sciences, Paint adhesion testing, Surfaces, Coatings and Films, 020303 mechanical engineering & transports, 0203 mechanical engineering, Coating, 0103 physical sciences, Materials Chemistry, engineering, Surface roughness, Composite material |
| الوصف: | Surface condition, especially surface roughness of substrates, critically influences the adhesion of cold-sprayed titanium alloy coatings. To study this, Ti6Al4V (Ti64) coatings were deposited on Ti64 substrates with increasing surface roughness (Ra) from 0.05 µm (polished surface) to 5.4 µm (water-jet cut surface). It was found that the substrate surface roughness did not significantly affect the porosity, hardness and coating surface roughness because these properties were dependent on the deposition parameters such as propellant gas pressure and temperature and nozzle traverse speed. The adhesion test results showed that smoother substrate surfaces improved the coating bond strength of the cold-sprayed Ti64 coatings from about 7.1 MPa (Ra: 5.4 µm, interface failure) to 68.7 MPa (Ra: 0.05 µm, glue failure). The fracture characteristics of the debonded coating/substrate interfaces revealed that there were more adiabatic shear-induced craters observed on the smoother substrate surfaces. Finite element modeling also showed that the substrate surface features (i.e., peaks and valleys) possibly prevented the intimate contact between the particles and substrate and thus induced the non-uniform distributions of temperature, stress and strain at the particle/substrate interface. |
| تدمد: | 1544-1016 1059-9630 |
| URL الوصول: | https://explore.openaire.eu/search/publication?articleId=doi_________::19364cf98b17e83e8873b54f034f736a https://doi.org/10.1007/s11666-019-00926-5 |
| حقوق: | CLOSED |
| رقم الأكسشن: | edsair.doi...........19364cf98b17e83e8873b54f034f736a |
| قاعدة البيانات: | OpenAIRE |
Find this article in full text from Springer Verlag. | تدمد: | 15441016 10599630 |
|---|