This paper describes the scaling limitation factors of ONO interpoly dielectric thickness, mainly considering the charge retention capability and threshold voltage stability for nonvolatile memory cell transistors with a stacked-gate structure, based on experimental results. For good intrinsic charge retention capability, either the top- or bottom-oxide thickness should be greater than around 6 nm. On the other hand, a thicker top oxide structure is preferable to minimize degradation due to defects. It has been confirmed that a 3.2 nm bottom-oxide shows detectable threshold voltage instability, but 4 nm does not. Effective oxide thickness scaling down to around 13 nm should be possible for flash memory devices with a quarter-micron design rule.
