Modelling a mechanical antenna for a calibrator for interferometric gravitational wave detector using finite elements method

التفاصيل البيبلوغرافية
العنوان: Modelling a mechanical antenna for a calibrator for interferometric gravitational wave detector using finite elements method
المؤلفون: A R C Prado, F S Bortoli, N. S. Magalhaes, R N Duarte, C Frajuca, R. C. Souza
المصدر: Journal of Physics: Conference Series. 2090:012157
بيانات النشر: IOP Publishing, 2021.
سنة النشر: 2021
مصطلحات موضوعية: History, Physics::Instrumentation and Detectors, Astrophysics::Instrumentation and Methods for Astrophysics, Computer Science Applications, Education
الوصف: Interferometric gravitational wave detectors (IGWD) are a very complex detector, the need to lock the detector in a dark fringe condition besides the vibrations that affect the mirrors, creates the necessity of using active suspension systems. These active systems make the system reach the desired sensitivity but make the calibration of such detectors much more difficult. To solve this problem a calibrator is proposed, a resonant mass gravitational wave detector could be used to detect the same signal in a narrower band and use the measured amplitude to calibrate the IGWD, as resonant mass gravitational wave detectors are easily calibrated. This work aims to design the mechanical antenna of such a calibrator. The main difficulty is to design the calibrator is the frequencies required to make the detection. These massive detectors usually were made in frequencies close to 1 kHz and the frequency range to operate for better sensitivity is around 100 Hz. The antenna is modelled in finite elements method and a design of such an antenna is presented.
تدمد: 1742-6596
1742-6588
URL الوصول: https://explore.openaire.eu/search/publication?articleId=doi_________::65b15f1ec05cc8a58b5f2dcedaae09b2
https://doi.org/10.1088/1742-6596/2090/1/012157
حقوق: OPEN
رقم الأكسشن: edsair.doi...........65b15f1ec05cc8a58b5f2dcedaae09b2
قاعدة البيانات: OpenAIRE