A Numerical Investigation of the Flow Mechanisms in a High Pressure Compressor Front Stage With Axial Slots
| العنوان: | A Numerical Investigation of the Flow Mechanisms in a High Pressure Compressor Front Stage With Axial Slots |
|---|---|
| المؤلفون: | Ingo Wilke, Hans-Peter Kau |
| المصدر: | Journal of Turbomachinery. 126:339-349 |
| بيانات النشر: | ASME International, 2004. |
| سنة النشر: | 2004 |
| مصطلحات موضوعية: | Materials science, business.industry, Mechanical Engineering, Mechanics, Structural engineering, Solid wall, Vortex, Trailing edge, Surge, business, Gas compressor, Transonic, Casing, Leakage (electronics) |
| الوصف: | This paper describes the impact of axial slots on the flow field in a transonic rotor blade row. The presented results are completely based on time-accurate three-dimensional numerical simulations of a high pressure compressor front stage with and without casing treatment. Two different axial positions of a casing treatment consisting of axial slots were tested for their impact on flow stability and efficiency. The first tested position (configuration 1) was chosen in a conventional way. The slots extend approximately from the leading up to the trailing edge of the rotor blades. As expected, the simulations of the compressor stage with this configuration showed a significant increase in flow stability near surge compared to the solid wall case. However, a non-negligible decrease in efficiency is also observed. Analyses of flow interactions between casing treatment and rotor blade rows under transonic conditions lead to the general conclusion that the stabilizing effect of circumferential grooves or axial slots mainly results from their impact on the tip leakage flow and its resulting vortex. A characteristic vortex inside the slots is observed in the simulations with the conventionally positioned casing treatment. This vortex removes fluid out of downstream parts of the blade passage and feeds it back into the main flow further upstream. The resulting impact on the tip leakage flow is responsible for the increased flow stability. However, the interaction between the configuration 1 casing treatment flow and the blade passage flow results in a significant relocation of the blade passage shock in the downstream direction. This fact is a main explanation for the observed decrease in compressor efficiency. A second slot position (configuration 2) was tested with the objective to improve compressor efficiency. The casing treatment was shifted upstream, so that only 25% of the blade chord remained under the slots. The simulations carried out demonstrate that this shift positively affects the resulting efficiency, but maintains the increased level of flow stability. A time-accurate analysis of the flow shows clearly that the modified casing treatment stabilizes the tip leakage vortex and reduces the influence on the flow inside the blade passage. |
| تدمد: | 1528-8900 0889-504X |
| URL الوصول: | https://explore.openaire.eu/search/publication?articleId=doi_________::78bad906047293ff6a2a5f4c3e80d40f https://doi.org/10.1115/1.1731465 |
| رقم الأكسشن: | edsair.doi...........78bad906047293ff6a2a5f4c3e80d40f |
| قاعدة البيانات: | OpenAIRE |
| تدمد: | 15288900 0889504X |
|---|