Qu, C, Li, Y, Jiang, J Z, Tucker, G, Neild, S A, Smith, M, Gleeson, A, Odetunde, S & Muhamedsalih, Y 2022, ' Reducing wheel–rail surface damage by incorporating hydraulic damping in the Bogie primary suspension ', Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility . https://doi.org/10.1080/00423114.2022.2092012
Wheel–rail surface damage in curves can be effectively reduced with a lower vehicle Primary Yaw Stiffness (PYS), while lowering PYS is detrimental to ride comfort and vehicle stability. This trade-off can be addressed by integrating hydraulic damping into primary suspension. However, work in this area only concentrated on comparing the effects of specific devices – the full potential of the hydraulic damping-integrated primary suspension on combating the trade-off considering the whole parameter space is still unknown. Here we address this by making the following two contributions: (1) fully exploring the potential of hydraulic-damping-integrated primary suspension, on minimising the PYS while maintaining ride comfort; (2) systematically investigating the trade-off between the PYS reduction and suspension stroke requirement. Based on a case study using the Mark 4 Coach, this paper found that the optimal hydraulic damping- integrated suspension can reduce PYS by 97% over the default without worsening comfort. This large reduction can potentially lead to a significant lifetime wheel-rail maintenance cost saving of approximately £42M for the fleet. If a larger suspension stroke is allowed, more cost saving can be achieved. These results provide motivation to conduct detailed engineering design studies to further examine the trade-off between financial benefits and design complexity.
