دورية أكاديمية
أعرض في EDS

The Optimization of Thrust Force in Drilling Operation on AISI 1050 Steel with Taguchi Method

التفاصيل البيبلوغرافية
العنوان: The Optimization of Thrust Force in Drilling Operation on AISI 1050 Steel with Taguchi Method
المؤلفون: Selçuk YAĞMUR, Ramazan ÇAKIROĞLU, Adem ACIR, Ulvi ŞEKER
المصدر: Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 5, Iss 2, Pp 241-246 (2017)
بيانات النشر: Gazi University, 2017.
سنة النشر: 2017
المجموعة: LCC:Engineering (General). Civil engineering (General)
LCC:Science
LCC:Science (General)
مصطلحات موضوعية: Drilling, Cutting Forces, Solid Cemented Carbide, Drill, Cutting Parameters, Engineering (General). Civil engineering (General), TA1-2040, Science, Science (General), Q1-390
الوصف: In this study, drillability performance was investigated on AISI 1050. Cutting speed, feed rate and cutting tool were determined as input parameters. Firstly, experimental design was made based on Taguchi L18 orthogonal array. Secondly, the experiments were carried out with three different feed rate (0,15-0,20-0,25 mm/rev) and three different cutting speeds (75-90-108 m/min) by using uncoated and coated (TiN/TiAl/TiCN) cutting tools. Drilling operations were performed at the CNC vertical machining center. The forces which occured during cutting were measured with the help of Kistler 9257 B dynamometer. Optimum cutting parameters were determined by using the obtained datas from experiments under favour of Taguchi Method. As a result of the applied Taguchi method, the most suitable parameter was found to be 90 m/min cutting speed and 0,15 mm/rev feed rate for coated drill.
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: English
Turkish
تدمد: 2147-9526
Relation: http://dergipark.gov.tr/download/issue-file/5680; https://doaj.org/toc/2147-9526
URL الوصول: https://doaj.org/article/0786adfc3f2649b48c1fe9eeef8f224a
رقم الأكسشن: edsdoj.0786adfc3f2649b48c1fe9eeef8f224a
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:21479526