دورية أكاديمية
أعرض في EDS

Study on Microstructure and Mechanical Properties of Low Cost Ti-Fe-B Alloy

التفاصيل البيبلوغرافية
العنوان: Study on Microstructure and Mechanical Properties of Low Cost Ti-Fe-B Alloy
المؤلفون: Sun Yangyang, Chang Hui, Fang Zhigang, Dong Yuecheng, Dan Zhenhua, Guo Yanhua, Zhou Lian
المصدر: MATEC Web of Conferences, Vol 321, p 11029 (2020)
بيانات النشر: EDP Sciences, 2020.
سنة النشر: 2020
المجموعة: LCC:Engineering (General). Civil engineering (General)
مصطلحات موضوعية: Engineering (General). Civil engineering (General), TA1-2040
الوصف: Microstructure evolution and mechanical properties of low cost Ti-2Fe-0.1B alloy under different heat treatment were studied. Results indicated that two kinds of equiaxed microstructures with different characteristics were obtained in conventional and double annealing, and typical lamellar microstructure was obtained in β annealing. Tensile test results shown that as-received rolled alloy possess highest strength and plasticity simultaneously due to fine and entangled microstructure. Uniform equiaxed dimples were observed in microstructure, which revealed ductile fracture morphology. Key words: titanium alloy; microstructure; heat treatment; mechanical properties
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: English
French
تدمد: 2261-236X
Relation: https://www.matec-conferences.org/articles/matecconf/pdf/2020/17/matecconf_ti2019_11029.pdf; https://doaj.org/toc/2261-236X
DOI: 10.1051/matecconf/202032111029
URL الوصول: https://doaj.org/article/14538ff56b1343febaefa7c0bad38be4
رقم الأكسشن: edsdoj.14538ff56b1343febaefa7c0bad38be4
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:2261236X
DOI:10.1051/matecconf/202032111029