دورية أكاديمية
A Method and Device for 3D Recognition of Cutting Edge Micro Geometry
العنوان: | A Method and Device for 3D Recognition of Cutting Edge Micro Geometry |
---|---|
المؤلفون: | Bartosz Palubicki, Michal Szulc, Gerhard Sinn, Kazimierz Orlowski, Jakub Sandak |
المصدر: | Drvna Industrija, Vol 65, Iss 1, Pp 11-19 (2014) |
بيانات النشر: | University of Zagreb, Faculty of Forestry and Wood Technology, 2014. |
سنة النشر: | 2014 |
المجموعة: | LCC:Forestry |
مصطلحات موضوعية: | cutting tool wear, 3D scanner, micro geometry, Forestry, SD1-669.5 |
الوصف: | A very useful method was successfully applied in the investigation of tools for machining wood and wood based composites. It allows scanning of the cutting edge micro geometry in three dimensions and reproducing it in a virtual space as a 3D surface. The application of the method opens new possibilities of studying tool wear by scanning, including the calculation of volume loss and other analysis of tool wedge geometry along and perpendicularly to the cutting edge. Effectiveness of the method and scanner were successfully verified by a reference ESEM (Environmental Scanning Electron Microscopy) method. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 0012-6772 1847-1153 |
Relation: | http://hrcak.srce.hr/file/175772; https://doaj.org/toc/0012-6772; https://doaj.org/toc/1847-1153 |
DOI: | 10.5552/drind.2014.1255 |
URL الوصول: | https://doaj.org/article/1e25a14703514c4696740d4ad9481db1 |
رقم الأكسشن: | edsdoj.1e25a14703514c4696740d4ad9481db1 |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 00126772 18471153 |
---|---|
DOI: | 10.5552/drind.2014.1255 |