دورية أكاديمية
Simulation of a thermoelectric gas sensor that determines hydrocarbon concentrations in exhausts and the light-off temperature of catalyst materials
| العنوان: | Simulation of a thermoelectric gas sensor that determines hydrocarbon concentrations in exhausts and the light-off temperature of catalyst materials |
|---|---|
| المؤلفون: | T. Ritter, S. Wiegärtner, G. Hagen, R. Moos |
| المصدر: | Journal of Sensors and Sensor Systems, Vol 6, Pp 395-405 (2017) |
| بيانات النشر: | Copernicus Publications, 2017. |
| سنة النشر: | 2017 |
| المجموعة: | LCC:Technology |
| مصطلحات موضوعية: | Technology |
| الوصف: | Catalyst materials can be characterized with a thermoelectric gas sensor. Screen-printed thermopiles measure the temperature difference between an inert part of the planar sensor and a part that is coated with the catalyst material to be analyzed. If the overall sensor temperature is modulated, the catalytic activity of the material can be varied. Exothermic reactions that occur at the catalyst layer cause a temperature increase that can then be measured as a sensor voltage due to the Seebeck coefficient of the thermopiles. This mechanism can also be employed at stationary conditions at constant sensor temperature to measure gas concentrations. Then, the sensor signal changes linearly with the analyte concentration. Many variables influence the sensing performance, for example, the offset voltage due to asymmetric inflow and the resulting inhomogeneous temperature distributions are an issue. For even better understanding of the whole sensing principle, it is simulated in this study by a 3-D finite element model. By coupling all influencing physical effects (fluid flow, gas diffusion, heat transfer, chemical reactions, and electrical properties) a model was set up that is able to mirror the sensor behavior precisely, as the comparison with experimental data shows. A challenging task was to mesh the geometry due to scaling problems regarding the resolution of the thin catalyst layer in the much larger gas tube. Therefore, a coupling of a 3-D and a 1-D geometry is shown. This enables to calculate the overall temperature distribution, fluid flow, and gas concentration distribution in the 3-D model, while a very accurate calculation of the chemical reactions is possible in a 1-D dimension. This work does not only give insight into the results at stationary conditions for varying feed gas concentrations and used substrate materials but shows also how various exhaust gas species behave under transient temperature modulation. |
| نوع الوثيقة: | article |
| وصف الملف: | electronic resource |
| اللغة: | English |
| تدمد: | 2194-8771 2194-878X |
| Relation: | https://www.j-sens-sens-syst.net/6/395/2017/jsss-6-395-2017.pdf; https://doaj.org/toc/2194-8771; https://doaj.org/toc/2194-878X |
| DOI: | 10.5194/jsss-6-395-2017 |
| URL الوصول: | https://doaj.org/article/21fddaad8dbb45c7a8ffff06da2765bf |
| رقم الأكسشن: | edsdoj.21fddaad8dbb45c7a8ffff06da2765bf |
| قاعدة البيانات: | Directory of Open Access Journals |
Full Text Finder | تدمد: | 21948771 2194878X |
|---|---|
| DOI: | 10.5194/jsss-6-395-2017 |