دورية أكاديمية
The Improvement of the Modified Starch—Glucomannan—Polyvinyl Alcohol Biothermoplastic Composite Characteristics With Polycaprolactone and Anhydride Maleic Acid
العنوان: | The Improvement of the Modified Starch—Glucomannan—Polyvinyl Alcohol Biothermoplastic Composite Characteristics With Polycaprolactone and Anhydride Maleic Acid |
---|---|
المؤلفون: | Bambang Admadi Harsojuwono, I. Wayan Arnata, Amna Hartiati, Yohanes Setiyo, Sayi Hatiningsih, Luh Suriati |
المصدر: | Frontiers in Sustainable Food Systems, Vol 6 (2022) |
بيانات النشر: | Frontiers Media S.A., 2022. |
سنة النشر: | 2022 |
المجموعة: | LCC:Nutrition. Foods and food supply LCC:Food processing and manufacture |
مصطلحات موضوعية: | modified starch, glucomannan, polyvinyl alcohol, polycaprolactone, anhydride maleic acid, Nutrition. Foods and food supply, TX341-641, Food processing and manufacture, TP368-456 |
الوصف: | The purpose of this study was to determine the concentrations of polycaprolactone (PCL) and anhydride maleic acid (AMA) to produce a biothermoplastic composite (BtC) of modified cassava starch–glucomannan–polyvinyl alcohol (MSGPvA) that meets the Indonesian National Standard (SNI) and International Bioplastic Standards such as ISO 527/1B, PCL from the UK, and ASTM 5336 for PLA plastic from Japan. This study measured the tensile strength ratio and Young's modulus of MSGPvA BtC compared to commercial biothermoplastic (CBt), elongation at break, swelling, water vapor transmission rate (WVTR), and biodegradation time. In addition, the surface profile, functional group, crystallinity, and thermal stability were also observed, which were analyzed qualitatively and quantitatively. MSGPvA BtC with 20% PCL and 3.5% AMA was able to increase and improve tensile strength, elongation at break, Young's modulus, swelling, WVTR, and degradation time. MSGPvA BtC with 5% PCL and 0.5% AMA has a transverse surface profile that shows the presence of clear and wavy fibers and an elongated surface profile with indistinct waves, containing the OH functional group at wavenumbers 2,962.66 and 3,448.72 cm−1 and C=O at a wavenumber of 1,735.93 cm−1, and has a low crystallinity degree but relatively high thermal stability. All MSGPvA BtC characteristics with 5% PCL and 0.5% AMA have met the SNI and International Bioplastic Standards (ISO 527/1B, PCL from England, ASTM 5336 for PLA plastic from Japan), except for swelling characteristics. Thus, MSGPvA BtC with 5% PCL and 0.5% AMA has the potential to be used as food packaging material. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 2571-581X |
Relation: | https://www.frontiersin.org/articles/10.3389/fsufs.2022.844485/full; https://doaj.org/toc/2571-581X |
DOI: | 10.3389/fsufs.2022.844485 |
URL الوصول: | https://doaj.org/article/da336ffe186a4eacaffe7c9ecad8a1d9 |
رقم الأكسشن: | edsdoj.336ffe186a4eacaffe7c9ecad8a1d9 |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 2571581X |
---|---|
DOI: | 10.3389/fsufs.2022.844485 |