دورية أكاديمية
Preparation and Performance of Ceramic Tiles with Steel Slag and Waste Clay Bricks
العنوان: | Preparation and Performance of Ceramic Tiles with Steel Slag and Waste Clay Bricks |
---|---|
المؤلفون: | Ying Ji, Enyao Li, Gang Zhu, Ruiqi Wang, Qianqian Sha |
المصدر: | Materials, Vol 17, Iss 8, p 1755 (2024) |
بيانات النشر: | MDPI AG, 2024. |
سنة النشر: | 2024 |
المجموعة: | LCC:Technology LCC:Electrical engineering. Electronics. Nuclear engineering LCC:Engineering (General). Civil engineering (General) LCC:Microscopy LCC:Descriptive and experimental mechanics |
مصطلحات موضوعية: | ceramic tiles, steel slag, waste clay bricks, solid waste resource utilization, Technology, Electrical engineering. Electronics. Nuclear engineering, TK1-9971, Engineering (General). Civil engineering (General), TA1-2040, Microscopy, QH201-278.5, Descriptive and experimental mechanics, QC120-168.85 |
الوصف: | Steel slag and waste clay bricks are two prevalent solid waste materials generated during industrial production. The complex chemical compositions of these materials present challenges to their utilization in conventional alumina silicate ceramics manufacturing. A new type of ceramic tile, which utilizes steel slag and waste clay brick as raw materials, has been successfully developed in order to effectively utilize these solid wastes. The optimal composition of the ceramic material was determined through orthogonal experimentation, during which the effects of the sample molding pressure, the soaking time, and the sintering temperature on the ceramic properties were studied. The results show that the optimal ceramic tile formula was 45% steel slag, 35% waste clay bricks, and 25% talc. The optimal process parameters for this composition included a molding pressure of 25 MPa, a sintering temperature of 1190 °C, and a soaking time of 60 min. The prepared ceramic tile samples had compositions in which solid waste accounted for more than 76% of the total material. Additionally, they possessed a modulus of rupture of more than 73.2 MPa and a corresponding water absorption rate of less than 0.05%. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 1996-1944 |
Relation: | https://www.mdpi.com/1996-1944/17/8/1755; https://doaj.org/toc/1996-1944 |
DOI: | 10.3390/ma17081755 |
URL الوصول: | https://doaj.org/article/8d34b7d4d53b426b86c6ba23455e672b |
رقم الأكسشن: | edsdoj.8d34b7d4d53b426b86c6ba23455e672b |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 19961944 |
---|---|
DOI: | 10.3390/ma17081755 |