دورية أكاديمية
Increasing the efficiency of technological preparation for the production of the manufacture components equipment for the mineral resource complex
العنوان: | Increasing the efficiency of technological preparation for the production of the manufacture components equipment for the mineral resource complex |
---|---|
المؤلفون: | Irina N. Khrustaleva, Sergei A. Lyubomudrov, Tatyana A. Larionova, Yana Y. Brovkina |
المصدر: | Записки Горного института, Vol 249, Pp 417-426 (2021) |
بيانات النشر: | Saint-Petersburg Mining University, 2021. |
سنة النشر: | 2021 |
المجموعة: | LCC:Mining engineering. Metallurgy |
مصطلحات موضوعية: | mineral resource complex, simulation modeling, cutting modes, processing error, production line, technological processing route, technological transition, automatic cycle, Mining engineering. Metallurgy, TN1-997 |
الوصف: | An increase of components production for the equipment intended for oil and gas production is a key factor for analyzing existing technological processes and searching for new technological solutions to improve the efficiency of the production process and the quality of components. The article presents a simulation model designed to determine the rational technological processing parameters for the production of the “Centralizer shell” part. The basis for optimizing the working cycle of a production line is synchronization based on the principle of proportionality, which involves equalizing the duration of all technological operations with the rhythm of the production line. Synchronization of technological operations on the production line is carried out by choosing rational cutting parameters for each technological transition (cutting speed, feedrate, number of working passes). The “Centralizer shell” part is made of titanium alloy VT16, which has high strength, corrosion resistance and ductility. For the part under consideration, the permissible values of the cutting parameters were determined based on the calculation of the total processing error, as well as the frequency of replacement of the worn cutting tool. The simulation model described in the article made it possible to increase the efficiency of the production process due to the synchronization of technological operations and the search for rational technological parameters, as well as to improve the manufacturing quality of the “Centralizer shell” part by analyzing the processing error at various parameters of the technological process. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English Russian |
تدمد: | 2411-3336 2541-9404 |
Relation: | https://pmi.spmi.ru/index.php/pmi/article/view/13340?setLocale=en_US; https://doaj.org/toc/2411-3336; https://doaj.org/toc/2541-9404 |
DOI: | 10.31897/PMI.2021.3.11 |
URL الوصول: | https://doaj.org/article/9d5924e2696a4ddf999f6e1baef241bc |
رقم الأكسشن: | edsdoj.9d5924e2696a4ddf999f6e1baef241bc |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 24113336 25419404 |
---|---|
DOI: | 10.31897/PMI.2021.3.11 |