دورية أكاديمية
Effect of Ball Burnishing Pressure on Surface Roughness by Low Plasticity Burnishing Inconel 718 Pre-Turned Surface
العنوان: | Effect of Ball Burnishing Pressure on Surface Roughness by Low Plasticity Burnishing Inconel 718 Pre-Turned Surface |
---|---|
المؤلفون: | Pengcheng Cui, Zhanqiang Liu, Xinglin Yao, Yukui Cai |
المصدر: | Materials, Vol 15, Iss 22, p 8067 (2022) |
بيانات النشر: | MDPI AG, 2022. |
سنة النشر: | 2022 |
المجموعة: | LCC:Technology LCC:Electrical engineering. Electronics. Nuclear engineering LCC:Engineering (General). Civil engineering (General) LCC:Microscopy LCC:Descriptive and experimental mechanics |
مصطلحات موضوعية: | surface roughness, low plasticity burnishing, LPB pressure, Hertz contact mechanics, slip-line field theory, Technology, Electrical engineering. Electronics. Nuclear engineering, TK1-9971, Engineering (General). Civil engineering (General), TA1-2040, Microscopy, QH201-278.5, Descriptive and experimental mechanics, QC120-168.85 |
الوصف: | The low plasticity burnished surface roughness is significantly affected by the low plasticity burnishing (LPB) parameters. This research proposed the analytical prediction model to predict the LPBed surface roughness and optimal LPB pressure based on Hertz contact mechanics and the slip-line field theory. In this study, the surface formatted process was divided into the smoothing stage (SS) and the indentation stage (IS). The smoothing mechanism of SS and the deterioration mechanism of IS were analyzed theoretically. The analytical prediction model for the LPBed surface roughness was proposed based on Hertz contact mechanics and slip-line field theory. The proposed analytical prediction model was validated by the LPBed surface roughness of AISI 1042, and the error of the analytically predicted results was less than 13.3%. After validation, the proposed model was applied to predict the LPBed surface roughness of Inconel 718. The single-factor experiments were conducted. The error between the proposed model prediction results and experimental results was less than 7% for the LPBed surface roughness of Inconel 718. The optimal LPB pressure interval was calculated to be [12.2 MPa, 17.5 MPa], corresponding to the experimental one as [12 MPa, 18 MPa]. It indicated that the proposed model could accurately predict the LPBed surface roughness and conduct the LPB processing. |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 1996-1944 |
Relation: | https://www.mdpi.com/1996-1944/15/22/8067; https://doaj.org/toc/1996-1944 |
DOI: | 10.3390/ma15228067 |
URL الوصول: | https://doaj.org/article/9eefb458584240b2bbfce0d63c53bb99 |
رقم الأكسشن: | edsdoj.9eefb458584240b2bbfce0d63c53bb99 |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 19961944 |
---|---|
DOI: | 10.3390/ma15228067 |