دورية أكاديمية

Hysteresis mechanism of supercritical CO2 desorption in coal and its implication for carbon geo-sequestration

التفاصيل البيبلوغرافية
العنوان: Hysteresis mechanism of supercritical CO2 desorption in coal and its implication for carbon geo-sequestration
المؤلفون: Cao LIU, Jiangwei YAN, Chunhui ZHAO, Fuping ZHONG, Tianrang JIA, Xiaolei LIU, Hang ZHANG
المصدر: Meitan xuebao, Vol 49, Iss 7, Pp 3154-3166 (2024)
بيانات النشر: Editorial Office of Journal of China Coal Society, 2024.
سنة النشر: 2024
المجموعة: LCC:Geology
LCC:Mining engineering. Metallurgy
مصطلحات موضوعية: co2 geo-sequestration, supercritical co2, desorption hysteresis, residual trapping, capillary pressure, quantitative model for carbon geo-sequestration, Geology, QE1-996.5, Mining engineering. Metallurgy, TN1-997
الوصف: Sequestration of CO2 in the unmineable coal seams is not only one of the most ideal options for reducing greenhouse gas effects, but also the only way for the coal industry to reduce CO2 emissions and achieve low carbonization sustainable development. However, the key unresolved issues regarding the CO2 geo-sequestration in coal seams is: “how long does CO2 injected into a coal seam remain in the seam?”. In this regard, on the basis of clarifying the hysteresis law of CO2 desorption in coals, this paper reveals the mechanism of supercritical CO2 desorption hysteresis, establishes a quantitative model for the geological storage of CO2, and explores the use of desorption hysteresis to achieve a long-term safe storage of CO2 in coal seams. The study results shows that the degree of desorption hysteresis of supercritical CO2 in coal is greater than that of subcritical CO2, and a stable hysteresis characteristic similar to a “parallel line” in the supercritical phase is formed between the adsorption and desorption isotherm. The fundamental reason for the desorption hysteresis is that the micro and nano sized pores in coal form curved surfaces due to their hydrophilicity, which generate strong capillary pressure following the Laplace’s equation, absorb liquid water, truncate and fix the supercritical CO2 fluid, and ultimately form CO2 residual trapping. For example, the cylindrical inorganic pores with a diameter of 40–10 nm in coal can generate a capillary pressure of 7.30–29.12 MPa, which is sufficient to block supercritical CO2. Taking the desorption isotherm of Jiulishan coal as an example, using the quantitative model for the geological storage of CO2 established in this study, it has been estimated that the total trapping capacity of the No.21 coal seam at depths of 900–1 500 m is stable at 35–37 m3/t. Among them, the adsorption trapping capacity accounts for about 80%, residual trapping capacity accounts for about 15%, and structural trapping capacity only accounts for 5%. Desorption hysteresis suggests that some measures should be taken to increase the proportion of CO2 residual trapping in coal seams as much as possible, the reason is that the residual CO2 sealed by capillary blockage is safer and has no risk of leakage compared to the free and adsorbed CO2 sealed by surrounding rock. The physical parameters such as ash content, moisture content, pore size, and morphology of coal seams are the main factors affecting the residual trapping efficiency.
نوع الوثيقة: article
وصف الملف: electronic resource
اللغة: Chinese
تدمد: 0253-9993
Relation: https://doaj.org/toc/0253-9993
DOI: 10.13225/j.cnki.jccs.2023.0738
URL الوصول: https://doaj.org/article/cfcbf73ab296499c89c040be4ff32281
رقم الأكسشن: edsdoj.fcbf73ab296499c89c040be4ff32281
قاعدة البيانات: Directory of Open Access Journals
الوصف
تدمد:02539993
DOI:10.13225/j.cnki.jccs.2023.0738