دورية أكاديمية
A comparison of dynamic inflow models for the blade element momentum method
| العنوان: | A comparison of dynamic inflow models for the blade element momentum method |
|---|---|
| المؤلفون: | S. Mancini, K. Boorsma, G. Schepers, F. Savenije |
| المصدر: | Wind Energy Science, Vol 8, Pp 193-210 (2023) |
| بيانات النشر: | Copernicus Publications, 2023. |
| سنة النشر: | 2023 |
| المجموعة: | LCC:Renewable energy sources |
| مصطلحات موضوعية: | Renewable energy sources, TJ807-830 |
| الوصف: | With the increase in rotor sizes, the implementation of innovative pitch control strategies, and the first floating solutions entering the market, the importance of unsteady aerodynamic phenomena in the operation of modern offshore wind turbines has increased significantly. Including aerodynamic unsteadiness in blade element momentum (BEM) methods used to simulate wind turbine design envelopes requires specific sub-models. One of them is the dynamic inflow model, which attempts to reproduce the effects of the unsteady wake evolution on the rotor plane induction. Although several models have been proposed, the lack of a consistent and comprehensive comparison makes their relative performance in the simulation of large rotors still uncertain. More importantly, different dynamic inflow model predictions have never been compared for a standard fatigue load case, and thus it is not clear what their impact on the design loads estimated with BEM is. The present study contributes to filling these gaps by implementing all the main dynamic inflow models in a single solver and comparing their relative performance on a 220 m diameter offshore rotor design. Results are compared for simple prescribed blade pitch time histories in uniform inflow conditions first, verifying the predictions against a high-fidelity free-vortex-wake model and showing the benefit of new two-constant models. Then the effect of shed vorticity is investigated in detail, revealing its major contribution to the observed differences between BEM and free-vortex results. Finally, the simulation of a standard fatigue load case prescribing the same blade pitch and rotor speed time histories reveals that including a dynamic inflow model in BEM tends to increase the fatigue load predictions compared to a quasi-steady BEM approach, while the relative differences among the models are limited. |
| نوع الوثيقة: | article |
| وصف الملف: | electronic resource |
| اللغة: | English |
| تدمد: | 2366-7443 2366-7451 |
| Relation: | https://wes.copernicus.org/articles/8/193/2023/wes-8-193-2023.pdf; https://doaj.org/toc/2366-7443; https://doaj.org/toc/2366-7451 |
| DOI: | 10.5194/wes-8-193-2023 |
| URL الوصول: | https://doaj.org/article/affcde9a58794510ae91124e263ac690 |
| رقم الأكسشن: | edsdoj.ffcde9a58794510ae91124e263ac690 |
| قاعدة البيانات: | Directory of Open Access Journals |
Full Text Finder | تدمد: | 23667443 23667451 |
|---|---|
| DOI: | 10.5194/wes-8-193-2023 |