Research in smart textiles is growing due to the increased demand from the healthcare sector and people's urge to keep track of and analyze the signals and metrics from their bodies. Electrically conductive filaments are the most fundamental material for smart textiles. These filaments can be imbued with functionalities and useful in fields like energy storage, sensing, and actuation. To be able to meet the requirements that the latter applications require, fabrication techniques must be developed to provide better processability and sustainability in a cost-effective manner. Here, a mixture of a conductive polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), and biobased cellulose nanofibrils (CNFs) was used to spin filaments utilizing a water-based process. These filaments show electrical conductivities up to 150 S/cm and tensile stiffness of 20 GPa. Interestingly, the PEDOT aligned to a similar degree as the CNFs during the spinning process without a drawing step, which is hypothesized to be caused by the attachment of PEDOT on the CNFs. Lastly, the filaments were tested in an organic electrochemical transistor (OECT) configuration, which resulted in a working device with an on/off ratio approaching 1500. Furthermore, the OECT exhibited stable behavior when changing temperature (20-80 °C) and relative humidity (40-80%). This aqueous spinning method, resulting in filaments with robust electronic properties in different temperature and humidity environments, show greats promise for future innovative smart textiles.
Find this issue from the American Chemical Society